Hoshizaki SRC-10H Bedienungsanleitung

Hoshizaki“A Superior Degreeof Reliability”www.hoshizaki.comModelFS-1001MLH/-CModular FlakerSerenity SeriesIncludingCondensing Unit Model SRC-10HHoshiz

10Fig. 23. LocationWARNINGThis icemaker is not intended for outdoor use. Normal operating ambienttemperature should be within +45°F to +100°F; Normal

115. Electrical ConnectionThis icemaker must have an independent power supply or receptacle of proper capacity.See the nameplate.6. Installation of Re

12[c] Setup1) Secure the legs to the condensing unit with eight M8 x 16 mm hexagon bolts and M8 nutsas shown in the illustration. See Fig. 4.Note: Loc

13[d] Electrical ConnectionWARNING1. This condensing unit must have a separate power supply. See thenameplate.2. This condensing unit requires a groun

147. Water Supply and Drain Connections See Fig. 7• External filters or strainers may be required depending on the water quality.• Water supply in

158. Timer Setting See Fig. 8The ice machine is equipped with an adjustable timer in the control box. It controls theamount of time the machine wai

169. Final Checklist1) Is the icemaker level?2) Is the icemaker in a site where the ambient temperature is within +45°F to +100°F and thewater tempera

1710. StartupIMPORTANT1. The condensing unit is shipped with the contacts of the secondary lowpressure switch open. Once power is supplied to the cond

1811. Preparing the Icemaker for Long Storage See Fig. 9WARNINGWhen shutting off the icemaker for an extended time, drain out all water from thew

19III. Cleaning and MaintenanceIMPORTANTEnsure all components, fasteners and thumbscrews are securely in place afterany maintenance or cleaning is don

2HOSHIZAKI AMERICA, INC.618 Highway 74 SouthPeachtree City, GA 30269Attn: HOSHIZAKI Technical Support DepartmentPhone: 1-800-233-1940 Technical Ser

20[b] Cleaning ProcedureThe cleaning process will remove lime deposits from the water system.1) Remove the front panel and top panel, then turn off th

21[c] Sanitizing SolutionDilute 2.5 fl. oz. (74 ml or 5 tbs) of IMS-II Sanitizer or a 5.25% sodium hypochlorite solution(chlorine bleach) with 5 gallo

2211) Disassemble the bin control assembly by removing the two snap pins, shaft andactuator.12) Soak the removed parts in .25 gallons (1 l) of sanitiz

2311) Remove the front panel.12) Move the flush switch to the “FLUSH” position to drain the remainder of the solution.13) After the solution is draine

242. Maintenance InstructionsIMPORTANT1. This icemaker must be maintained individually, referring to the instructionmanual and labels provided with th

25HOSHIZAKI AMERICA, INC.618 Hwy. 74 S., Peachtree City, GA 30269 USA TEL (770) 487-2331 FAX (770) 487-3360 www.hoshizaki.com 91A2PB10B

3CONTENTSI. Specifications ... 41. Na

4I. Specifications1. Nameplate Rating[a] FS-1001MLH, FS-1001MLH-CSee the nameplate for electrical and refrigerationspecifications. This nameplate is l

5[b] Condensing Unit Model SRC-10HWe reserve the right to make changes in specifications and design without prior notice.See the nameplate for electri

62. Dimensions/Connections[a] FS-1001MLH, FS-1001MLH-CUnit = inches [mm]

7[b] With Storage BinUnit = inches [mm.]

8[c] Condensing Unit Model SRC-10H

9Fig. 1II. Installation and Operating Instructions1. Checks Before InstallationWARNINGRemove shipping carton, tape(s) and packing. If packing material