Hoshizaki DB-130H Bedienungsanleitung

SERVICE MANUAL July 13, 2005MODEL HOSHIZAKIICE DISPENSING BINDB-130H 73128 June 15, 2005ISSUED: NO: REVISED:

10C. Spout Switch1) Turn off the power supply. 2) Remove the front panel. 3) Remove the spout switch assembly and Barrier (A). 4) Disconnect the conne

11VI. Cleaning and Maintenance InstructionsIMPORTANTEnsure all components, fasteners and thumbscrews are securely in place after any maintenance or cl

12ChuteSpout – Front Panel

136) Scrub the inside of the bin, the agitator, the spout of the bin, the spout of the front panel and chute using a nylon scouring pad, brushes and c

2IMPORTANTOnly qualified service technicians should attempt to service or maintain this dispensing bin. No service or maintenance should be undertaken

3Please review this manual. It should be read carefully before the dispensing bin is serviced or maintenance operations are performed. Only qualified s

4I. SpecificationWe reserve the right to make changes in specifications and design without prior notice. AC SUPPLY VOLTAGE 115/60/1 AMPERAGE 1.4 AMINIM

5II. General InformationA. Construction

6III. Technical InformationA. Wiring Diagram

7IV. Service DiagnosisProblem Possible Cause Remedy[1] No ice dispensed. a) Power Supply 1. "OFF" position. 1. Move to "ON" positi

8Problem Possible Cause Remedyh) Mechanism 1. Chain out of position or loose.1. Place in position or tighten.2. Corrosion. 2. Apply oil.3. Key of spro

9V. Removal and Replacement of Components A. Gear Motor and Chain 1) Turn off the power supply. 2) Remove the front panel and left side panel. 3) Loos