Hoshizaki KM-2000SRF3 Bedienungsanleitung PDF herunterladen (Seite 14)

(Control Products HOSHIZAKI001 Board)

to the K1 connector. If there is a white wire, place the switch in the C position. If this

switch is placed in the wrong position either the compressor contactor will remain ener-

gized with the control switch OFF or the unit will not start.

The dip switches should be adjusted per the adjustment chart published in the Tech

Specs book. 7 & 8 must remain in the OFF position.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Keine Kommentare

Hoshizaki KM-2000SRF3 Bedienungsanleitung Seite 14