ISSUED:HOSHIZAKIMODULAR CRESCENT CUBERINSTRUCTION MANUALFEB. 21, 2001MODELSKML-450MAHKML-450MWHREVISED:SEPT. 24, 2001TM
104. SET UP1) Unpack the Storage Bin, and attach the four adjustable legs provided (bin accessory) tothe bottom of the Storage Bin.2) Position the Sto
116. WATER SUPPLY AND DRAIN CONNECTIONS - See Fig. 4IMPORTANTDo not operate the icemaker when the water supply is OFF, or if the pressureis below 10 P
12Fig. 4KML-450MWHKML-450MAH
137. FINAL CHECK LIST1) Is the icemaker level?2) Is the icemaker in a site where the ambient temperature is within +45°F to +100°F andthe water temper
148. START UPCAUTION1. All parts are factory-adjusted. Improper adjustments may result in failure.2. If the unit is turned off, wait for at least 3 m
15Note: The Bin Switch will only shut down the unit at the end of a harvest or within the first 5 minutes of the freeze cycle. To shut the
169. PREPARING THE ICEMAKER FOR LONG STORAGECAUTIONWhen shutting off the icemaker for an extended time, drain out all water fromthe water line and rem
17[2] Remove the water from the potable water supply line:1) Turn off the power supply and remove the Front Panel.2) Move the Control Switch, on the C
18III. CLEANING AND MAINTENANCE INSTRUCTIONS1. CLEANING INSTRUCTIONSWARNING1. HOSHIZAKI recommends cleaning this unit at least once a year. Morefrequ
1910) Move the Service Switch to the “WASH” position.11) Replace the Insulation Panel and the Front Panel in their correct positions.12) Turn on the p
2HOSHIZAKI AMERICA, INC.618 Highway 74 SouthPeachtree City, GA 30269Attn: HOSHIZAKI Technical Support DepartmentPhone: 1-800-233-1940 Technical Ser
20 Note: If you do not sanitize the icemaker, go to step 14) in “SANITIZING PROCEDURE.”[b] SANITIZING PROCEDURE - Following Cleaning Procedure1)
212. MAINTENANCEIMPORTANTThis icemaker must be maintained individually, referring to the instructionmanual and labels provided with the icemaker.1) St
2291A1BE10BHOSHIZAKIHOSHIZAKI AMERICA, INC.618 HIGHWAY 74 SOUTHPEACHTREE CITY, GA 30269U.S.A.PHONE: 770-487-2331
3 • Please review this manual. It should be read carefully before the icemaker is installedand operated. Only qualified service technicians should
4I. SPECIFICATIONS1. NAMEPLATE RATING[a] KML-450MAH (Air-cooled)See the Nameplate for electrical and refrigeration speci-fications. This Nameplate is
5[b] KML-450MWH (Water-cooled)See the Nameplate for electrical and refrigeration speci-fications. This Nameplate is located on the upper righthand si
62. DIMENSIONS/CONNECTIONS[a] KML-450MAHUnit: inches (mm.)
7[b] KML-450MWHUnit: inches (mm.)
8II. INSTALLATION AND OPERATING INSTRUCTIONS1. CHECKS BEFORE INSTALLATIONIMPORTANTRemove shipping carton, tape(s) and packing. If packing material is
92. HOW TO REMOVE PANELS - See Fig. 1a) Front Panel ... Remove the screw.Lift up and pull towardyou.b) Top Panel .... Lift its front up
Kommentare zu diesen Handbüchern