Hoshizaki KM-101BAH Bedienungsanleitung PDF herunterladen (Seite 18)

b) Connection to a Closed Loop System

Condenser Water

Supply Inlet

Minimum Condenser

Water Supply Line Size

Condenser

Return Outlet

Minimum Condenser

Return Line Size

1/2" Female Pipe

Thread (FPT)

1/4" Nominal ID Copper

Water Tubing or Equivalent

1/2" Female Pipe

Thread (FPT)

1/4" Nominal ID Copper

Water Tubing or Equivalent

• Shut-off valves and drain valves must be installed at both the condenser water supply

inlet and condenser return outlet.

• Minimum water ﬂ ow to the condenser is 4 GPM.

• The pressure differential between the condenser water supply inlet and condenser return

outlet must be no less than 10 PSIG.

• When using a glycol blend, the solution mixture should be less than 30% glycol.

• In order to maintain the proper high side pressure, the condenser water supply inlet

temperature must be in the 45°F to 90°F (7°C to 32°C) range.

Fig. 6

KM-151BWH

Icemaker Water Supply

Inlet 1/2” FPT

Icemaker Drain

Outlet 3/4” FPT

Condenser Return

Outlet 1/2” FPT

Condenser Water

Supply Inlet 1/2” FPT

2-inch (5-cm) air

gap

Drain

Floor

To approved ﬂ oor drain

1/4” fall per foot

Icemaker Water Supply

Line Shut-off Valve

Icemaker Water Supply

Line Drain Valve

Minimum 1/4” Nominal ID

Copper Water Tubing

Condenser Water Supply

Line Shut-off Valve

Condenser Water Supply

Line Drain Valve

Minimum 3/4” Nominal

ID Hard Pipe

Trap

Condenser Return Line

Shut-Off Valve

Condenser Return

Line Drain Valve

Be sure there is sufﬁ cient

extra water supply line and

drain line for the appliance

to be pulled out for service.

Separate piping to approved

drain. Leave a 2-inch (5-cm)

vertical air gap between the

end of each pipe and the

drain.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Hoshizaki KM-101BAH Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gefrierschränke Hoshizaki KM-101BAH