Hoshizaki KM-101BAH Bedienungsanleitung PDF herunterladen (Seite 11)

II. Installation and Operating Instructions

WARNING

• Install in accordance with all applicable national, state, and local codes and

regulations.

• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are

securely in place after installation. Make sure that none have fallen into the storage

bin.

A. Checks Before Installation

NOTICE

• Remove all shipping cartons, tape, and packing material. If any are left in the

icemaker, it will not work properly.

• Remove the shipping tapes holding the door and separator. See Fig. 1.

• Visually inspect the exterior of the shipping container and immediately report any

damage to the carrier. Upon opening the container, any concealed damage should also

be immediately reported to the carrier.

• Remove the panels to prevent damage when installing the icemaker. (See “B. How to

Remove Panels.”)

• Remove the package containing the accessories.

• Remove the protective plastic ﬁ lm from the panels. If the icemaker is exposed to the sun

or to heat, remove the ﬁ lm after the icemaker cools.

• Check that refrigerant lines do not rub or touch lines or other surfaces, and that the fan

blade turns freely.

• Check that the compressor is snug on all mounting pads.

• See the nameplate on the upper part of the left side panel, and check that your voltage

supplied corresponds with the voltage speciﬁ ed on the nameplate.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Hoshizaki KM-101BAH Bedienungsanleitung Seite 11