Hoshizaki KM-101BAH Bedienungsanleitung PDF herunterladen (Seite 17)

2. Water-Cooled Condenser

a) Connection to an Open Drain System

Condenser Water

Supply Inlet

Minimum Condenser

Water Supply Line Size

Condenser Drain

Outlet

Minimum Condenser

Drain Line Size

1/2" Female Pipe

Thread (FPT)

1/4" Nominal ID Copper

Water Tubing or Equivalent

1/2" Female Pipe

Thread (FPT)

1/4" Nominal ID Hard

Pipe or Equivalent

• A condenser water supply line shut-off valve and drain valve must be installed.

• In some areas, a back ﬂ ow preventer may be required in the cooling water circuit.

• In order to maintain the proper high side pressure, the condenser water supply inlet

temperature must be in the 45°F to 90°F (7°C to 32°C) range.

Fig. 5

KM-151BWH

2-inch (5-cm) air

gap

Drain

Floor

Icemaker Water Supply

Inlet 1/2” FPT

Icemaker Drain

Outlet 3/4” FPT

Condenser Drain

Outlet 1/2” FPT

Condenser Water

Supply Inlet 1/2” FPT

To approved

ﬂ oor drain

1/4” fall

per foot

Icemaker Water Supply

Line Shut-off Valve

Icemaker Water Supply

Line Drain Valve

Minimum 1/4” Nominal ID

Copper Water Tubing

Condenser Water Supply

Line Shut-off Valve

Condenser Water Supply

Line Drain Valve

Minimum 3/4” Nominal

ID Hard Pipe

Minimum 1/4” Nominal

ID Hard Pipe

Trap

Be sure there is sufﬁ cient

extra water supply line and

drain line for the appliance

to be pulled out for service.

Separate piping to approved

drain. Leave a 2-inch (5-cm)

vertical air gap between the

end of each pipe and the

drain.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Hoshizaki KM-101BAH Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gefrierschränke Hoshizaki KM-101BAH